1.Eject the disc drawer, leave it open.
2.Press 77 under the number buttons. (Please try 2001 if 77 does not work)
3.Press select - you will see a software menu screen, then use the down arrow to move to the region code setting.
4.It will show what you have presently, now enter the code number you want (example: 1,2,3,4,5,6) on the number buttons.
5.Press select - this will confirm the number you just choose
6.Press return 2 times.
7.Enter your DVD disc and close the draw.
8.Press play to start watching your movie

STEP A
1) Change region code to the region of the disc you wish to watch. (Then put PAL disk in drawer).
2) It should say disk is damage or mismatch TV system.
3) Push the setup button once.
4) Push the arrow up button once to custom setup.
5) Push the select button.
6)Push the arrow down button two times to TV system
7) Push the select button once.
8)Push the arrow down button once to PAL
9) Push the select button once.
10) Push the return button until you see DVD on screen.
11) If the movie starts to play push the stop button

STEP B
(Screen may be rolling in black and white.)
Please folow the following steps:

1) Push the setup button once.
2) Push the arrow up button once to custom setup.
3) Push the select button.
4)Push the arrow down button two times to TV system
5) Push the select button once.
6)Push the arrow up button once to NTSC
7) Push the select button once.
8) Push the return button until you see DVD on screen.
9) Push the return button once.

STEP A
1) Change region code to the region of the disc you wish to watch.
(Then put PAL disk in drawer).
2) It should say disk is damage or mismatch TV system.
3) Push the setup button once.
4) Push the select button.
5) Push the arrow up button once to custom setup.
6) Push the select button.
7)Push the arrow down button two times to TV system
8) Push the select button once.
9)Push the arrow down button once to NTSC 10) Push the select button once.
11) Push the return button until you see DVD on screen.
12) If the movie starts to play push the stop button

STEP B
(Screen may be rolling in black and white.)
Please folow the following steps:

1) Push the setup button once.
2) Push the select button.
3) Push the arrow up button once to custom setup.
4) Push the select button.
5)Push the arrow down button two times to TV system
6) Push the select button once.
7)Push the arrow up button once to PAL
8) Push the select button once.
9) Push the return button until you see DVD on screen.
10) Push the return button once.

1. Push Setup button
2. Push Arrow-up button once to Custom Setup
3. Push Select button
4. Push Arrow-down button two times to TV System
5. Push Select button
6. Push Arrow-up button or Arrow-down button to PAL or NTSC.
7. Push Select button
8. Push Return button until you see DVD VIDEO on screen